DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED SECURITY DOOR USING SMART CARD

DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED SECURITY DOOR USING SMART CARD  (A RESEARCH PROJECT TOPIC ON ELECTRICAL AND ELECTRONICS)

ABSTRACT

This project shows the construction of a microcontroller based security door using smart card. It is aimed towards programming the microcontroller to control the hardware in sliding door. The system consists of a microcontroller 89S52 which sends a signal to the multiplexers on insertion of the smart card in the card slot. The multiplexers consist of ICS which prompts for a display of the identity of the card user in the liquid crystal display (LCD). The LCD displays the status of the card. On validation of the card, the LCD displays a welcome note to the user and prompts for a pin code. The pin code is being keyed in from the key pad. If confirmed by the program written into the microcontroller access will be granted, otherwise no access, giving the user two more chances to insert the correct smartcard or pin code to it, before final denial of access and alarm. When access is granted, the card sends a 5volt signal to the microcontroller which triggers relay, resulting in the opening of the door.

DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED SECURITY DOOR USING SMART CARD  (A RESEARCH PROJECT TOPIC ON ELECTRICAL AND ELECTRONICS)