CONSTRUCTION OF OFFICE TABLE AND CHAIRS

CONSTRUCTION OF OFFICE TABLE AND CHAIRS

ABSTRACT

The aim of this project was to construct one office table and four chairs. In the course of this project the length of plank used was 12” and we used about 4 number (mahogany) of 1” thickness, ¾ plywood of 1 sheet of 1” thickness, as well as ¼” plywood of ½  and glue 1 tin wenner 1 rod, foam ½ sheet.  Fabrics 4 years, spraying materials and 21b of nail were utilized to effect the  construction of office table and chairs. The materials were marked out to the required sizes, cut, folded, fited, assembled, nail, mort iced and then spraying it finally to prevent corrosion attack. There are the necessary constructional procedure steps adopted in the project.  The accuracy and precision with which the construction steps and consequently, the assemblage of the component parts greatly enhanced our aim of constructing a suitable equipment for use of one table and four chairs. The aim of constructing the table and the chair is to enable chemical Engineering department as future Engineer to know and also learn how to construct an office table or chairs and the essence of it.  The cost of production of the office table and chairs as at 7th August, 2005 is N21,000.00.