CONSTRUCTION OF A SIX RAISED PANEL DOOR

CONSTRUCTION OF A SIX RAISED PANEL DOOR

CHAPTER ONE

INTRODUCTION 

BACKGROUND OF THE STUDY

        A door is a solid barrier that is fixed in an opening in a wall to hinge , pivot or slide pen (or close).

        The door opening or door way allows access and agrees from  building and between rooms, compartments and corridors.  As a component part of a wall he door and if frame are integral to the overall performance of the wall.

        Doors are meant to provide access to the room of a building. They may be constructed of wood, plywood, glass, metal or a combination of these materials they are located in such a way that easy movement and privacy of the room is achieved. For this reason the door are generally placed at the corner of the room in one line. This provides good ventilation and easy movement of the users.

DEFINITION OF A DOOR

A door can be defined as a hinged, sliding or revolving barrier at the entrance of a building, room or vehicle or in the framework of a cupboard.

CLASSIFICATION OF A DOOR

          Wood door may be classified as:

-      Paneled doors

-      Flush doors

PANELED DOOR

          Paneled doors are frame with stiles and rails around a panel or panel of wood  or ply wood because the door is hinged on the side to open, it tends to sink on the lock stile.

        The stile and rails have to be joined to resist the tendency of the doors to sink.

FLUSH DOOR  

        A variety of flush doors are manufactured with plain flush faces both sides and fibreboard facing press moulted often with comparatively shallow sinking to resemble the appearance of a paneled door.

1.3    OBJECTIVES OF THE STUDY

        This project is aimed at using timber towards the construction of the panel door by the carpenters.

        It will try to examine some of the importance of timber to the student while undertaking the project endeavour in using timber in the construction of a pane door.

1.4    SIGNIFICANCE OF THE STUDY

        The essence of this project is to draw the attention of the students, carpenters and individuals in constructing a panel door using timbers.

        This research draws the attention of the individuals to the need of timber for construction of a panel door as well as its uses in storing and making a panel door.