BENCH SHAPING MACHINE

BENCH SHAPING MACHINE

TABLE OF CONTENT

CHAPTER ONE

Introduction                                                                                                1

Metal Shearing (Lit. Review)                                                            2

Chapter Two

Component Parts of Bench Shearing Machine                                  4

Chapter Three

Theory and Analysis of Problem                                                      11

Fabrication of Bench Shearing Machine (Sequence of Operation)    14

Strength of Component                                                                              15

Machine Mechanisms                                                                        16

Chapter Four

Cost Analysis                                                                                   18

Test and Results                                                                               19

Maintenance (Precautions)                                                                20

Chapter Five

Inference                                                                                           21

Recommendation (Observation)                                                       21

Conclusion                                                                                        22

CHAPTER ONE

INTRODUCTION

The production of bench shearing machine to deduce, and probably eliminate sufferings and most especially the need for technological break through and self reliance has been a major concern of the federal government .

Detail shearing and shaping has been a firing problem in the society from time old especially towards our loco – parenthesis. To help eradicate these problems this project write up his derived into simplicities and construction of bench shearing machine that can be used to cut up to 3mm sheet of mild steel with a treated blade made up of high carbon steel.

The machine is operated manually with a long handily know as its effort. The lengthiness of the handle helps it to increase output towards the work piece. The material to be cut must be low carbon material example mild steel, low carbon material dead mild steel or aluminum alloys.

Other things discussed in the thesis include the component parts of the bench shearing machine, design and construction.(sequence of operation) problems encountered and maintenance of the machine to help readers get used to the work done.

METAL SHEARING

LITERATURE REVIEW

Several countries which has made an impact towards technological break through started by cutting, shearing, filling and assembling metal parts inform of machine that can produce the desired component that is while a large portion of the training and skills of a workshop engineer is denoted to the shaping of metal and stopping the process at the proper time.

In the workshop most of the shaping involve shearing of metal sheets, usually the conception of shearing suggest shearing the substance apart with a chisel. It involves the shearing action by the use snipe for tin sheets.

There are four different types of shearing metal sheets in the workshop this include:

GULL TONE:-

This is a big machine that can cut long range of length in metal sheet which is normally powered by hydraulic or leg for less pressure. gull tone use in time sheets or paper gull tone.

BENCH SHAPING MACHINE